How to Cure Your Hypertufa

Hypertufas are primarily created as planters and garden decorations as they definitely are extremely light and sturdy, being able to put up with intense winter conditions, as opposed to those that are made from concrete. Hypertufas can be readily created by anyone on their own house, utilizing household objects, as long as that they have the proper ingredients. However, to be able to successfully build one for your garden, you must do as instructed thoroughly as a tiny mistake could badly have an effect on the finished product of your project. Probably the most crucial step in the creation of hypertufas is the curing process as it will generally determine if your project is a success or failure.

The curing process in making hypertufas commences after applying the mixture to the mold. Always keep in mind that in order for your mixture to stay intact in the mold, you have to make certain that it has a good quantity of moisture. Consequently wind breezes are problems when creating hypertufas as it can rob the moisture off your mixture. Thus it is a good idea to work in sheltered areas to avoid breezes.

Another important step in curing your hypertufa is storing it in a plastic or trash bag. The purpose of this is to ensure that your wet hypertufa is shielded from external elements such as wind and debris. It also seals in the moisture so that your creation will not fall apart. Just after about one to three days, look at your creation by scratching it with your fingernail; if it cannot be scratched with your fingernail anymore, then you can already take away the mold off your creation. You can smoothen the rough sides or increase texture to your hypertufa by using a wire brush but you still have to be cautious since it is still sensitive.

Soon after removing the mold, put your creation once again in the plastic or trash bag and leave it in an area where it will not be disturbed or meddled with. You must also preserve the moisture of your hypertufa by occasionally misting it with water. Depending on the size of your project and the humidity and temperature of the place, the curing process could take for approximately a month so that it is completely dried and usable. You’ll know that your hypertufa is entirely cured as soon as it produces a hollow sound whenever you knock on it.